Extruded square cord, data sheet
Profile | Material | Hardness | Temperature | Check stock of spools |
NBR Black Perbunan® | 70 SH A | -20 to +100 ºC | ||
FPM Black FDA Viton® | 75 SH A | -20 to +200 ºC | ||
FPM Green Viton® | 70 SH A | -20 to +200 ºC | On request | |
VMQ Translucent FDA Xiametre® | 60 SH A | -50 to +180 ºC | On request | |
VMQ Red FDA Xiametre® | 70 SH A | -50 to +180 ºC | On request | |
EPDM Black FDA Keltan® For drinking water | 70 SH A | -60 t0 +180 ºC | On request | |
EPDM White FDA Keltan® | 70 SH A | -60 to +180 ºC | On request | |
CR Black Neoprene® | 70 SH A | -30 to +120 ºC | On request |
How about choosing an extruded square cord?
In general terms, rubber washers provide better sealing than O-rings and also resist better to wear thanks to their better behavior against extrusion.
However, because of their widespread commercialization, it is much simpler and cheaper to purchase O-rings or Cord-rings. Therefore, a simple, effective and cheap way to remedy this problem is to use an extruded square section profile. Cut to the desired size, the square cord makes it possible to manufacture washers, either by gluing or by warm-vulcanization.
At JIOrings, we have the most popular sizes in stock: Black NBR70 (Perbunan @) and Black FDA FPM75 (Viton®). On request, we also manufacture the following compounds: Green FPM70 (Viton®), Black CR70 (Neoprene®), Translucent FDA VMQ60 (Xiametre®), Red FDA VMQ70 (Xiametre®), Black FDA EPDM70 (Keltan®) for drinking water, White FDA EPDM70 (Keltan®).
Extruded square cord, table of tolerances
Thickness | Tolerances (mm) NBR | Tolerances (mm) FPM | Tolerances (mm) EPDM | Tolerances (mm) VMQ |
1,00 | ±0,20 | Consult | ±0,30 | ±0,30 |
1,50 | ±0,20 | Consult | ±0,30 | ±0,30 |
1,60 | ±0,20 | Consult | ±0,30 | ±0,30 |
1,78 | ±0,20 | -0,10 / +0,30 | ±0,30 | ±0,30 |
2,00 | ±0,20 | -0,10 / +0,30 | ±0,30 | ±0,30 |
2,40 | ±0,20 | -0,20 / +0,30 | ±0,30 | ±0,30 |
2,50 | ±0,20 | -0,20 / +0,30 | ±0,30 | ±0,30 |
2,62 | ±0,20 | -0,20 / +0,30 | ±0,30 | ±0,30 |
3,00 | ±0,25 | -0,20 / +0,30 | ±0,35 | ±0,35 |
3,53 | ±0,35 | -0,20 / +0,30 | ±0,35 | ±0,35 |
4,00 | ±0,35 | -0,20 / +0,40 | ±0,35 | ±0,35 |
4,50 | ±0,35 | -0,20 / +0,40 | ±0,35 | ±0,35 |
5,00 | ±0,35 | -0,20 / +0,40 | ±0,40 | ±0,40 |
5,33 | ±0,35 | -0,20 / +0,40 | ±0,40 | ±0,40 |
5,50 | ±0,35 | -0,20 / +0,40 | ±0,40 | ±0,40 |
5,70 | ±0,35 | -0,20 / +0,40 | ±0,40 | ±0,40 |
6,00 | ±0,35 | -0,20 / +0,40 | ±0,45 | ±0,45 |
6,35 | ±0,40 | -0,30 / +0,50 | ±0,45 | ±0,45 |
6,50 | ±0,40 | -0,30 / +0,50 | ±0,45 | ±0,45 |
6,99 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
7,50 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
8,00 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
8,40 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
8,50 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
9,00 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
9,50 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
10,00 | ±0,40 | -0,40 / +0,60 | ±0,50 | ±0,50 |
11,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
12,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
13,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
14,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
15,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
16,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
18,00 | ±0,70 | -0,60 / +0,80 | ±0,90 | ±0,90 |
20,00 | ±0,70 | -0,60 / +0,80 | ±0,90 | ±0,90 |