Static seals, main range
| Seals | Profile | Material | SH A | ºC | Check stock |
| O-Rings |  |
NBR | 40 – 90 | -20 to +100/+120 | |
| O-Rings | |
FPM | 50 – 90 | -20 to +200/+220 | |
| O-Rings | |
EPDM | 40 – 90 | -50 to +110/+130 | |
| O-Rings | |
EPDM PX | 40 – 90 | -50 to +130/+150 | |
| O-Rings |  |
VMQ | 20 – 80 | -60 to +180/+200 | |
| O-Rings | |
FFKM | 60 – 90 | -15 to +270/+320 | |
| X-Rings |  |
NBR | 70 | -20 to +100/+120 | |
| X-Rings | |
FPM | 70 | -20 to +200/+220 | |
| X-Rings | |
EPDM PX | 70 | -50 a +130/+150 | |
| Back-Up Rings (BUR) |  |
NBR | 90 | -20 to +100/+120 | |
| Cord-Ring |  |
NBR | 70 | -20 to +100/+120 | |
| Cord-Ring | |
FPM FDA | 75 | -20 to +200/+220 | |
| Cord-Ring |  |
VMQ FDA | 60 | -60 to +180/+200 | |
| Cord-Ring |  |
VMQ FDA | 70 | -60 to +180/+200 | |
| Cord-Ring | |
EPDM FDA | 70 | -30 to +110/+130 | |
| Cord-Ring |  |
EPDM FDA | 70 | -30 to +110/+130 | |
| Cord-Ring | |
CR | 70 | -30 to +100/+120 | |
| X-Ring Cord |  |
NBR | 70 | -20 to +100/+120 | |
| X-Ring Cord | |
FPM FDA | 75 | -20 to +200/+220 | |
| X-Ring Cord | |
EPDM FDA | 70 | -30 to +110/+130 | |
| X-Ring Cord |  |
VMQ FDA | 70 | -60 to +180/+200 | |
| Square Cord |  |
NBR | 70 | -20 to +100/+120 | |
| Square Cord | |
FPM FDA | 75 | -20 to +200/+220 | |
| Encapsulated |
 |
FPM + FEP | – | -20 to +200/+220 | |
| Encapsulated |  |
VMQ + FEP | – | -60 to +180/+200 | |
| Bonded Seal |  |
NBR / FPM Steel /Stainless Steel |
– | – | |
| Washers (Flat gaskets) |
 |
On request | – | – | |
| Flange seals |  |
On request | – | – |
 |
| Fitting seals DIN 3869 |
 |
On request | – | – |
|
| TVK |  |
NBR | – | -20 to +100 |
|
Static seals, the best closure for surfaces which do not move
Static seals are used for sealing applications in which the element to be sealed in a surface experiences no movement relative to this surface. That is to say, they seal surfaces which do not move relative to each other. Within the range of static seals are featured cord-ring, quad-rings, and the most commonly used, O-rings.
You will find more detailed information below about static seals, their profile, the material they are manufactured in (NBR, FPM, EPDM, VMQ…) as well as the pressure and temperature which this type of seal can withstand. You can also observe the machined parts, together with their type and profile. Detailed information which will help you to make the ideal choice of static seal.