Rotary Shaft Seals
| Type | Profile | Material | Bars | ºC | m/s | On request |
| V-Ring VA |  |
NBR FPM |
– | -20 to +100 -20 to +200 |
≤10 | |
| V-Ring VS |  |
NBR FPM |
– | -20 to +100 -20 to +200 |
≤10 | |
| V-Ring VL |  |
NBR FPM |
– | -20 to +100 -20 to +200 |
≤10 | |
| Oil seal CB |  |
NBR FPM |
≤0,50 | -20 to +100 -20 to +200 |
≤30 | |
| Oil seal CB Springless |
 |
NBR | – | -20 to +100 | ≤30 | |
| Oil seal CC |  |
NBR FPM |
≤0,50 | -20 to +100 -20 to +200 |
≤30 | |
| Oil seal BB |  |
NBR | ≤0,50 | -20 to +100 | ≤30 | |
| Oil seal BC |  |
NBR | ≤0,50 | -20 to +100 | ≤30 | |
| Oil seal DB |  |
NBR | ≤0,50 | -20 to +100 | ≤30 | |
| Oil seal DC |  |
NBR | ≤0,50 | -20 to +100 | ≤30 | |
| Oil seal HP for pressure |
 |
NBR FPM |
≤10 | -20 to +100 -20 to +200 |
≤30 | |
| Oil seal HP for pressure |
 |
PTFE FDA +SS304 PTFE/GLASS/MOS2 +SS304 |
≤25 | -90 to +250 | ≤45 | |
| Stainless Steel Spring |  |
SS AISI 302 | – | – | – | |
| TVK |  |
NBR | ≤0,50 | -20 to +100 | – |
 |
| Radial rod seal |  |
NBR/FKM + Filled PTFE |
– | – | – |
|
| Radial piston seal |  |
NBR/FKM + Filled PTFE |
– | – | – |
|
Rotary seals, the best mobile connection between mobile elements
Rotary seals are used for rotating components, that is to say, then a mobile connection is needed between elements which are mobile. The purpose of rotary seals is twofold, on the one hand they prevent lubricating fluid from escaping, and on the other hand they prevent water, dust, or mud entering. This type of seal is operative in a wide range of temperatures and pressures.
You have all the information that you will need below about rotary seals, (CB with spring, CB without spring, CC, BB, BC, DB, DC, PC for pressure, HP, VA, VS…), including their type, profile, the material in which they are manufactured, as well as the pressure, temperatures, and speeds which they can withstand.